Bluetooth Internet with 6600

has anyone got this to work with Mobile Action 700 bluetooth usb adapter? this adapter comes with its own software which is way different from others, there is not Bluetooth settings in the control panel as some guys mentioned, so what can i do ?

Mika Raento wrote:It _is_ possible to set up a 6600 to use a Bluetooth connection for Internet, you just can't
use mRouter with it. If you have Windows XP or Linux (you might be able to use Win2000),
you can check out my rough instructions at http://www.cs.helsinki.fi/u/mraento/symbian/bt-ap.html.

Be warned though: this is not quite end-user friendly.

Mika Raento

When I try to use my 6600 to connect internet via pc, it says:"unable to connect. no network coverage". I did ewerything what Raento's instruction tell to do. My software is 4.09.1.

Is this because my phone's GSM tranceiver is not working? (The hole phone works perfect except the GSM-part.

Have anyone tryed to use the bluetooth-pc-internet-connection without network coverage?

Does it work?

just want to say thanx to everyone for all the usefull tips.. i have finally able to setup my own bluetooh internet 😃 after much trials and errors

i also figure it out but i can not surf net in opera, agile messenger and world mate can someone help me

I've followed everything to the letter but when I try to select gnubox->options->2box Direct->Bluetooth I get an error on the phone saying "Unable to connect. Max number of Bluetooth connection already in use."

Any help would be grealty appreciated cause I'm working on a project creating a j2me program that uses a gprs connection and it's costing me a fortune!

edit: right I've solved that problem (had my bluetooth manager connected, idiot!), now when I try to connect using opera I cannot connect and Doris Browser says 'Failed Connect', any ideas?

Thanks,
vaughty

I've tried to connect my Nokia 6600 to the Internet for 3 days, now. I followed all the instructions provided in this forum and the other websites: No success!

Problem1: The protocol of my newly created modem in XP reads (in German):

08-08-2004 04:53:05.300 - Datei: C:\WINDOWS\System32\tapisrv.dll, Version 5.1.2600
08-08-2004 04:53:05.300 - Datei: C:\WINDOWS\System32\unimdm.tsp, Version 5.1.2600
08-08-2004 04:53:05.300 - Datei: C:\WINDOWS\System32\unimdmat.dll, Version 5.1.2600
08-08-2004 04:53:05.300 - Datei: C:\WINDOWS\System32\uniplat.dll, Version 5.1.2600
08-08-2004 04:53:05.300 - Datei: C:\WINDOWS\System32\drivers\modem.sys, Version 5.1.2600
08-08-2004 04:53:05.300 - Datei: C:\WINDOWS\System32\modemui.dll, Version 5.1.2600
08-08-2004 04:53:05.300 - Datei: C:\WINDOWS\System32\mdminst.dll, Version 5.1.2600
08-08-2004 04:53:05.300 - Modemtyp: Kommunikationskabel zwischen zwei Computern
08-08-2004 04:53:05.300 - Pfad f�r Modeminformationsdatei: mdmhayes.inf
08-08-2004 04:53:05.300 - Abschnitt in Modeminformationsdatei: M2700
08-08-2004 04:53:05.300 - �bereinstimmende Hardwarekennung: pnpc031
08-08-2004 04:53:05.300 - Das �ffnen des Modems ist fehlgeschlagen. Fehler: 00000005

The last line is important (i guess): Error opening the modem!

I looked for a new driver for the virtual modem, but couldn't find any. I was only able to download a modem.sys from some obscure website and didn't dare to replace it with the one on the system. So, I'm stuck here....

Problem 2:

After EXACTLY following the instructions for creating a new connection on the Nokia 6600, I tried to start Gnubox many times. Always the same messages.

Start:
Loading CommDb
CSD/GPRS settings...

I think gnubox get's s tuck here and can't load the settings, because whenever i select 2box Direct->Bluetooth I get a "Gnubox:Already in use!" error message....

I guess the second problem is kind of serious....

Any ideas, anybody. I really have to get this working.

What I really need to do is to load data into J2ME/Flash Lite apps from my local test weberver over bluetooth... Do you have to use Gnubox to feed J2ME on the Nokia 6600? Which application work online , when following these instructions:

http://www.russellbeattie.com/notebook/1001649.html

??

I've to add something to the second problem with gnubox:

After the "Gnubox:Already in use!" error message the display reads:

DialOutLSP
Description:
DefaultTelNum: 0815
ModemBearer
No Nokia modem

What means "No Nokia modem?"..That Gnubox couldn't find the created Nokia modem on my pc? Maybe, because the drivers were not installed properly? See problem 1....

hello all ,
I hav read this whole thread .... so , when i tried to apply the modem setting... i.e. adding new modem ... my win xp professional hangs .... so i cant add a new modem .... i tried everything ..... so i wana ask that , is it imp. to go thru this step of adding new modem ....

warm regards to all
adi

Hi there. Can anyone help me.
I've done everything on http://www.cs.helsinki.fi/u/mraento/symbian/bt-ap.html and my phone successfully connects to the PC. (..or at least 50% of the time. Sometimes i get a script error).
However, in services I can successfully access http://www.google.com/wml but after a while it will stop letting me access other pages. Also, i'm not able to get onto http://www.realnetworks.com/mobile/series60.html. Does anyone have an idea why? I'd really like to get streaming radio/video via this connection.

Cheers

Alucard3455 wrote:In the modem part for computers, my bluetooth COM port isn't shopwing up. It's COM3. I'm running WInXP with a IOGear USB bluetooth dongle.

I have the same problem. The Bluetooth serial port doesn't show up when I try to add the null modem. Running WinXP, too. Anyone with a solution?

christian27 wrote:Problem 2:

After EXACTLY following the instructions for creating a new connection on the Nokia 6600, I tried to start Gnubox many times. Always the same messages.

Start:
Loading CommDb
CSD/GPRS settings...

I think gnubox get's s tuck here and can't load the settings, because whenever i select 2box Direct->Bluetooth I get a "Gnubox:Already in use!" error message....

I was getting this too until I started looking through the GNUBOX source and discovered the APN "Bt" is hard coded in the software. I had named mine "BlueTooth" because every time I see "Bt" it goes through a 5 second translation search until I remember it's BlueTooth. Changing the name to "Bt" got me connected.

JEff

just interested..anyone was successfull setting this up with dial-up connection on PC ?
Or only LAN ?

i have been trying to find somthing to set up a bluetooth enabled internet/wap for my SE t630 and the only thing i have found so far is Flaots mobile Manneger, this is really crap for creating any internet surfing of the t630 via a desktop enabled bluethooth USB stick.

MY NEED IS INFO ON getting bluetooth internet on my t630

email / msn:[email protected]

dapkor wrote:i have been trying to find somthing to set up a bluetooth enabled internet/wap for my SE t630 and the only thing i have found so far is Flaots mobile Manneger, this is really crap for creating any internet surfing of the t630 via a desktop enabled bluethooth USB stick.

MY NEED IS INFO ON getting bluetooth internet on my t630

email / msn:[email protected]

nailbiter wrote:I have the same problem. The Bluetooth serial port doesn't show up when I try to add the null modem. Running WinXP, too. Anyone with a solution?

you have got to untick ur com port in the nokia connectioon manager stuff so that the com port is not taken

Just wondering if any one has been able to share a 56k Dial-up connection with a 6600 over BT

I have been pulling my hair out trying to get this to work

Cheers Guys

BB

BTW Great Forum

Hi all,

I'm trying to set up internet connection on my Nokia 6600 with winXP (Lan internet connection). My dongle is a DLink DBT-120.

I've followed on steps carefully, but it simply doesn't work.

In the Access Point (setup screen on my phone), I have:
D+ (an icon for GSM/Hi, I guess) Bt
Configured as followed (i'm translating from french, may be not the exact terms):
Connection Name: Bt
Data Bearer: GSM/Hi-Rate
Server Phone Number: 222
Username: winxp [indeed I've created it for testing purpose]
Password: 'the password of winxp' (displayed as ****)
Authentication: normal
Home Page: None
Call Data Type: Analogic [not ISDN]
Max Rate: Automatic
Phone IP Address: Automatic
DNS primary: 0.0.0.0
DNS Secondary: 0.0.0.0
Proxy Address: 0.0.0.0 [when testing with netsh, else 192.168.0.74]
Proxy Port: [not defined with netsh, else 6588]
Use callback: No
Callback: Use server phone call number
Callback phone number: None
PPP Compression: Yes
Script To use: yes
Script connection: as found on some sites (begins with CHARMAP....)

I have paired my phone, and use 2Box for:
Direct over Bt
Bluetooth settings...
DialOutSP
Description: Direct 2box
DefaultTelNum:
ModemBearer:
PortName: BTCOMM::0
CSVName: BTCOMM
TSVName: PHONETSV

So, I use a 'Service/Bookmark', in which I've defined Test with using Access Point Bt and http://www.google.com/wml

What it's strange, nothing seems to reach the PC! When the bluetooth serial port is used, winXP used to add a tooltip to show that the serial connection is used by the phone device (it's for example the case with bemused, that is using COM4 too).

If I delete the 'Incoming Connections' I've created on WinXP and listening on COM4 (instead of the Incoming Connections listener) then nothing seems to be received when I'm trying to connect to the internet from my phone. But if i start bemused, some data are received.

During my various attempts, at a given time I've noticed that when I was trying to browse internet from my phone, when the connection was attempted, a tooltip with a blinking phone icon was at the top right of my phone screen and it seems in this case the phone is doing a kind of call (i hear the carrier in my PC speakers like it's the case when i'm about to issue or to receive a phone call). But in this case I get an error like (always translated from french): "Internet: Please check your configuration parameters."

After having use 2Box, the phone number seems to be removed from my Access Point config, is it normal?

How can i check that all steps are done correctly? Is it a kind of log file generated somewhere on phone, or PC.

Help would be greatly appreciated.

Johann

Hi i had gnubox runnig on my noia 6600. I was able to connect via bt to the internet with linux. But it worked only sometimes so i tried it on windows XP SP2 with less success. So i switched back to linux. But it wont work anymore. I made a new AccessPoint and reinstalled gnubox. But gnubox does use the old settings which wont work.
Are there any files left from the last installation?
How can i solve this problem?

Thanks for your help!

Hi.

I'm really angry ! Since yesterday i can't find source to download mrouter!

Can anybody help me ?

Where can I download new versiony of mrouter (for example mrouter 3.0 , 3.0 beta) ? ! ! !

A lot of thanx !

Adam

I tried ! nokia 6600 V 4.09.1 26-02-04 NHL -10

Phone - Bluetooth -Laptop - WI-FI -Router - Internet connection

6600:
Username: a username that can log in on your Windows box
Promp password: No
Password: password for the user on Windows
Authentication: Normal
Advanced Settings: Use Login Script Yes
Advanced Settings: Login Script
CHARMAP [windows-1252]
LOOP 10
{
SEND "CLIENT"+<0x0d>
WAIT 3
{
"SERVER" OK
}
}
EXIT KErrNoAnswer$

OK:
EXIT

be careful that you get it exactly as show here, including linebreaks. You could save it to a file, send to the phone and copy-paste to the settings.
Advanced Settings: Use PPP Compression Yes

In Windows XP i used Kerio Winroute Pro
I configured in Advanced NAT Options Network/mask
IP address of mobile (2 see that ipconfig om CMD prompt)
Mask
Destination any address
and choose outgoing interface that connected to internet
and check do NAT with Spec IP
Leave IP blank

Its work 100 % ( I Didnt use GNUBOX or other software )

It might well be the bluetooth adapter.
I had gnubox running with an AIPTEK bluetooth device and everything was fine. Then I attached the DLink DBT-120 because my boss bought it for his computer and it wouldn't work, so I tried on my computer (because I knew the setup was OK). Result: I didn't even get the serial connection anymore. So I installed the WIDCOMM software (which sucks because it's using a "security code"😉. Still wouldn't work. Switched back to the Aiptek software and bluetooth device - everything's fine again.

Connection via BT works fine to me, thx to http://www.cs.helsinki.fi/u/mraento/symbian/bt-ap.html

Hi i've recently got a 6260 and have tried the instructions for the 6600 and can't get this to work. anyone got any ideas?

i also tried all the instructions from various places (http://www.cs.helsinki.fi/u/mraento/symbian/bt-ap.html) and gnubox. it does not want to work. also i noticed no one here has ver5.27.0 software on there phones
have nokia now blocked this on ver5 ?

using a WIDCOMM usb dongle

I Tried all these intructions tooo without any luck..... Are u saying that we cant do this on 6600 with Software V.5.27.0 ? How can nokia designers block this feature....this is crap......... Against freedom of the People....Against Open Source....... We need to find a solution to this brothers. :con?

apparently works with ver 3 and 4 software..... also i dont get the proper response from gnubox in 2box direct..... maybe a problem with gnubox and ver5 software?

Hi!

I have V 5.27.0 Nokia 6600, XP SP2 and i setup step by step! My phone connected the pc and i see another small monitor on the right down, but on the phone the netfront can't receive any byte!😞 What is wrong? Can anybody help me? Thx

I have also problems connecting the N6600
My phone has firmware V4.09.1.

I tried to configure the whole thing over and over again and on diferent computers, it doesn't want to work.

I have i problem with the netsh commands
when i enter 'install' and want to add the interfaces i get an error saying i need to install NAT??? i just did :con?

Then i tried with the 'analog' proxy server, i tried with internet sharing but stil doens't want to work.

I have btw a sitecom usb dongle.

Anybody an idea?

help